MAC 101 CLD (discontinued)

Larger Images

The MAC 101 CLD uses pure cold LEDs for applications where only higher color temperatures are required and is intensity controllable.

The ultra-compact MAC 101 LED moving head wash is available in three white light versions that expand its use to applications where high quality, pure white light is needed. Ideal for highlighting skin tones, textiles, or set pieces, the MAC 101 variants incorporate cold and/or warm LEDs instead of RGB for a better white light quality and greater output.

  • High quality cold white LED light
  • Ideal for highlighting skin tones, textiles or set pieces
  • Variable color temperature


  • High quality cold white LED light
  • Ideal for highlighting skin tones, textiles or set pieces
  • Variable color temperature
  • Tight and punchy beam effects, long throw, modern ACL replacement
  • Multiple field angle options for a perfect wash via optional diffusers
  • Incredibly fast and precise movement
  • Ultra-compact, low weight design (3.7 kg)
  • Less than 125 watt total power requirement


Physical Length: 241 mm across yoke Width: 241 mm across yoke Height: 304 mm Weight: 3.7 kg
Dynamic Effects Shutter effect: Electronic, with pulse and random effects Electronic dimming: 0 - 100%, four dimming curve options Pan: 540° Tilt: 240° Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming Control: DMX RDM: Implemented Control resolution: 8-bit, with 16-bit control of pan & tilt DMX channels: 7 Setting and addressing: Control panel with backlit graphic display Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM Transceiver: RS-485 Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics Light source: Cree XP-E high power emitters Color temperature: 6700 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* LED refresh rate: 1220 Hz *Figure obtained under manufacturer´s test conditions:
Construction Color: Black or white Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Installation Mounting points: One M12 threaded hole for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm from head, no minimum distance from base Minimum distance to illuminated surfaces: 200 mm
Connections AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon DMX data in/out: 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Maximum total power consumption: 123 W Power supply unit: Auto-ranging electronic switch mode Main fuse: 5 AT (slow blow) Typical power consumption, all effects static, zero light output: <25 W
Typical Power and Current 100 V, 50 Hz: 122 W, 1.3 A, PF 0.991 120 V, 60 Hz: 121 W, 1.1 A, PF 0.987 208 V, 60 Hz: 123 W, 0.7 A, PF 0.938 230 V, 50 Hz: 123 W, 0.6 A, PF 0.915 240 V, 50 Hz: 123 W, 0.6 A, PF 0.900 PF = power factor: Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Total heat dissipation (calculated, +/- 10%): 420 BTU/hr.
Approvals EU safety: EN 60598-2-17, EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
CE ETL C US Intertek 
Included Items M12 bolt suitable for use with Martin rigging clamps: User manual: 35000246
Accessories 3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: TBA Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: 05342805 Set of eight narrow diffusers for MAC 101: 91616023 Set of eight wide diffusers for MAC 101: 91616018 Set of 4 top hats for MAC 101: 91611358 Set of 5 quick-mount surface mounting brackets for MAC 101: 91606017 G-clamp: 91602003 Quick trigger clamp: 91602007 Safety cable, safe working load 50 kg: 91604003 8-unit flightcase for MAC 101™: 91515010 Half-coupler (tube) clamp: 91602005
Related Items Martin USB Duo™ DMX Interface Box: 90703010 Martin RDM 5.5 Splitter™: 90758150
Ordering Information MAC 101 CLD™ in cardboard box: 90231670 MAC 101 CLD™ in 8-unit flightcase: 90231660


  Version Language Size Uploaded
file type icon MAC 101 Serie - Bedienungsanleitung
de version G, updated: May 2018
de  793 KB May 2018
file type icon MAC 101 Series - User Manual
en version G, updated: May 2018
en  880 KB May 2018
file type icon Série MAC 101 - Manuel d´utilisation
fr version G, updated: May 2018
fr  1020 KB May 2018
CAD Drawings
file type icon MAC 101 - Head Horizontal (3DS)
en version A, updated: May 2018
en  2.17 MB May 2018
file type icon MAC 101 - Head Vertical (3DS)
en version A, updated: May 2018
en  2.3 MB May 2018
file type icon MAC 101 / Aura / Aura XB - ETL Authorization to Mark
en version D, updated: May 2018
en  621 KB May 2018
file type icon MAC 101 - EU Declaration of Conformity
en version B, updated: May 2018
en  311 KB May 2018
platform icon MAC101 CLD_Main CPU software
version 1.0.0, updated: May 2018
1.0.0     87 KB May 2018
Service Notes
Installing MAC 101 Series diffuser filters
en version A, updated: May 2018
A   en    May 2018
file type icon MAC 101 / Aura / Aura XB - Mounting Bracket Installation
en version B, updated: May 2018
en  441 KB May 2018
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
version 4, updated: Oct 2020
  743 KB Oct 2020
Hints And Tips
Avoiding damage from sunlight and other light sources
en version B, updated: May 2018
B   en    May 2018
platform icon MAC 101 CLD - Firmware
version 1.0.0, updated: Dec 2023
1.0.0     Dec 2023

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.


HARMAN Professional Solutions: