The MAC 700 Wash is an exceptionally powerful wash light with a clean, even, soft-edged beam, a motorized zoom, indexible beamshaper and rich CMY color mixing.
Features
- 700 W short arc discharge lamp
- Total output up to 18700 lumens
- CMY color mixing system
- 8 position color wheel plus open
- Variable CTC
- Indexing & rotating beamshaper
- Strobe effect 2 - 10 Hz, random strobe, pulse effects
- Motorized zoom
- Mechanical dimming
- Pan and tilt range of 540°/246°
- Electronic ballast with hot lamp restrike and flicker free light
- Variable fan control for quieter operation
Specifications
Physical
Length: 450 mm
Width: 365 mm
Height: 656 mm, head straight up
Weight: 32 kg
Dynamic Effects
Color mixing: CMY, independently variable 0 - 100%
Color wheel: 8 interchangeable filters (5 colors, UV, half minus green, CTC) + open
Color temperature control: 0 - 100%
Mechanical dimmer: 0 - 100%
Shutter: Strobe effect 2 - 10 Hz, random strobe, pulse effects
Beamshaper: 0° - 360° indexable, continuous rotation
Zoom: 12.5° - 66°, 1/10 peak angles
Pan: 540°
Tilt: 246°
Control and Programming
DMX channels: 16/23
Setting and addressing: Control panel with LED display
16-bit control: CMY, CTC, color wheel, mechanical dimmer, zoom, pan & tilt
Movement control options: Tracking and vector
Protocol: USITT DMX512/1990
Receiver: Opto-isolated RS-485
Firmware update: Serial upload via DMX link
Lamp
Type: 700 W short-arc discharge
Fitted as standard: Osram HTI 700/D4/75
Color temperature: 7500 K
CRI (Color rendering index): >85
Average lifetime: 750 hours
Hot restrike: Yes
Socket: Double-ended SFc 10-4 with key
Ballast: Electronic
Approved alternative lamp(s): Philips MSR Gold 700 SA/2 DE
Construction
Color(s): Black
Housing: UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20
Installation
Mounting points: 2 pairs of 1/4-turn locks
Orientation: Any
Connections
AC power input: 3 m integral cable without power plug
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-120/208-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Main fuse (100-120 V power): 15 AT (slow blow)
Main fuse (208-240 V power): 10 AT (slow blow)
Typical Power and Current
100 V, 60 Hz: 1019 W, 10.3 A, PF 0.996
110 V, 60 Hz: 977 W, 9.0 A, PF 0.995
120 V, 60 Hz: 988 W, 8.3 A, PF 0.995
208 V, 60 Hz: 949 W, 4.7 A, PF 0.976
230 V, 50 Hz: 944 W, 4.2 A, PF 0.973
240 V, 50 Hz: 940 W, 4.0 A, PF 0.970
250 V, 50 Hz: 940 W, 3.9 A, PF 0.966
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Maximum surface temperature, steady state, Ta=40° C: 160° C
Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 3340 / 3190 BTU/hr.
Approvals
EU safety: EN 60598-1, EN 60598-2-17
EU EMC: EN 55 015, EN 55 103, EN 61 000-3
US safety: ANSI/UL 1573
Canadian safety: CSA C22.2 No. 166


Included Items
Osram HTI 700/D4/75 lamp (installed): 97010212
10 AT main fuse (installed): 05020025
15 AT main fuse: 05020027
Two Omega clamp attachment brackets with 1/4-turn fasteners: 91602001
User manual: 35000185
Accessories
Philips MSR Gold 700 SA/2 DE lamp: 97010312
GE CSR700/S/DE/60 lamp: 97010240
Frost filter: 91611263
T-shaped omega bracket with quarter-turn fasteners: 91602008
G-clamp: 91602003
Half-coupler clamp: 91602005
Quick trigger clamp: 91602007
Super Truss 20.5" mounting plate with half-couplers: 91602014
Swing-wing truss mounting plate with half-couplers: 91602010
Double flightcase, MAC 550 Profile, MAC 700 Wash, MAC 700 Profile: 91510020
Spare Parts
Osram HTI 700/D4/75 lamp: 97010212
10 AT main fuse: 05020025
15 AT main fuse: 05020027
Ordering Information
MAC 700 Wash in cardboard box: 90207400
MAC 700 Wash in double flightcase: 90207401
Downloads
Size | ||||
Specifications | ||||
![]() |
23.5 KB | |||
Photometric Data
![]() |
||||
![]() |
23.8 KB | |||
Manuals | ||||
![]() |
1.1 MB | |||
![]() |
861 KB | |||
![]() |
1.03 MB | |||
Illustrations | ||||
![]() |
3.46 MB | |||
![]() |
3.16 MB | |||
![]() |
477 KB | |||
![]() |
411 KB | |||
![]() |
200 KB | |||
Compliances | ||||
![]() |
77.4 KB | |||
![]() |
223 KB | |||
Software | ||||
version 1.4.0,
updated: May 2018
|
72.2 KB | |||
Service Notes | ||||
10 Amp Fuses on MAC 550 and 700 at 208 - 240 V
![]() |
||||
10 AT fuses in MAC 700 at 208-240 V power
![]() |
||||
3DPartsfinder using Solid Works Composer player
![]() |
||||
DMX cables now optional accessories
![]() |
||||
Lampholder Replacement
![]() |
||||
Mac550/575/700 series - Rear end overheating/melting
![]() |
||||
![]() |
252 KB | |||
![]() |
303 KB | |||
![]() |
8.27 MB | |||
Hints And Tips | ||||
![]() |
43.4 KB | |||
Avoiding damage from sunlight and other light sources
![]() |
||||
Discharge Lighting Shutdown Guidelines
![]() |
||||
Electrical safety test equipment
![]() |
||||
Firmware | ||||
version 1.4.0,
updated: Nov 2023
|
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.